Customer Service Hotline:
+8613261677119
+8613261677119
TL;DR - The Mistairhome WL-AH03L (STD) holds 6020 mL and mists 200 mL per hour or 90.0 mL per hour, which is 30.1 hours and 66.9 hours per fill; the oil side takes 8.0 mL and runs 26.7 hours per fill at 0.3 mL per hour; it covers 71 sq m (769 sq ft) at a 2.6 m ceiling and measures 29.1 dB on the high step and 26.8 dB on the sleep step; it draws 14.1 W and takes its supply from Mains adapter, 100-240 V, regional plug supplied; two 4 ml oil reservoirs, either side of the collar, filled from the top without moving the unit; the humidistat holds target band 30 to 85 percent in 1 percent steps, held within 3 percent over Wi-Fi 2.4 GHz plus a wired sensor header for a remote probe, and zone view for open-plan floors, with an oil usage counter per day, voice runs through Amazon Alexa and Google Home for target changes, scent step and on off; no internal cell on this build; it weighs 1986 g and measures 28.8 x 28.8 x 47.6 cm, and ships documented to CE / RoHS / FCC standards for import into Brazil. MOQ is 200 units per SKU with a 15-25-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Aroma Humidifier Large Tank category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH03L-STD:
| Misting method | Twin ultrasonic piezo disc banks at 1.7 MHz feeding a wide-throw outlet collar |
| Tank capacity | 6020 mL |
| Mist output on the high step | 200 mL per hour |
| Mist output on the low step | 90.0 mL per hour |
| Run time per fill on the high step | 30.1 hours |
| Run time per fill on the low step | 66.9 hours |
| Coverage area | 71 sq m (769 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 29.1 dB |
| Noise at 1 m on the sleep step | 26.8 dB |
| Scent delivery method | two 4 mL oil reservoirs, either side of the collar, filled from the top without moving the unit |
| Oil tray capacity | 8.0 mL |
| Oil contact parts | PP reservoirs with fluorinated seals, rated for continuous citrus use |
| Scent intensity control | Four intensity steps, with a duty cycle option for all-day sites |
| Scent run time per tray fill | 26.7 hours |
| Oil use per hour | 0.3 mL per hour |
| Water type | Tap water or distilled; the tank is sized for two nights plus a working day |
| Mineral dust handling | Cartridge bay holding two cartridges, swapped on the disc life counter |
| Fill method | Top fill from a jug, with a level window on two faces |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | Mains adapter, 100-240 V, regional plug supplied |
| Rated power on the high step | 14.1 W |
| Control interface | Capacitive panel with target humidity, four mist steps, scent step and a child lock |
| Network link | Wi-Fi 2.4 GHz plus a wired sensor header for a remote probe |
| App platform | zone view for open-plan floors, with an oil usage counter per day |
| Voice assistant support | Amazon Alexa and Google Home for target changes, scent step and on off |
| Humidistat range and accuracy | target band 30 to 85 percent in 1 percent steps, held within 3 percent |
| Scheduling | Seven day schedule with six events per day and a holiday hold mode |
| Night light | Seven-colour floor glow plus a white status bar, both dimmable to off |
| Protection | Dry-run shut-off, tilt switch, overfill overflow channel, sensor fault alert |
| Dimensions | 28.8 x 28.8 x 47.6 cm |
| Weight | 1986 g |
| Warranty | 24 months |
| Shipped kit | Standard build, 1 x USB-C cable, 1 x cleaning brush, 1 x oil pipette, instruction leaflet, retail box |
| Units per master carton | 8 |
| Lead time | 15-25 days |
Buyers in Brazil are not buying fragrance so much as buying a stop to a specific complaint: a dry throat in the morning, a room that smells shut, a child waking coughing, or a guest who mentions the air in a review. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Returns in the Aroma Humidifier Large Tank category cluster around three causes: mineral dust on hard water, a scent that is stronger than the room wants, and a tray that cannot be cleaned. All three are answered at quotation stage rather than after arrival. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Brazil through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. For this configuration that means 90.0 mL per hour at 26.8 dB, holding 66.9 hours per fill and 26.7 hours of scent across a 71 sq m (769 sq ft) room.
Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.
The third is the oil side, and it is the one nobody quotes. Scent is consumed at a rate, not by a setting, and across this range that rate sits between roughly 0.22 and 0.35 mL per hour depending on the step and the disc. Divide the tray capacity by that rate and a buyer knows how many nights a fill of oil lasts, which is the figure that decides whether the product is a pleasure or a chore. Ours is published per model and per step.
Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, oil tray seal integrity after a 72 hour soak in a citrus blend, and dry-run shut-off function on an empty tank. For this configuration that means 90.0 mL per hour at 26.8 dB, holding 66.9 hours per fill and 26.7 hours of scent across a 71 sq m (769 sq ft) room.
Three deployment records from the Aroma Humidifier Large Tank programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A physiotherapy clinic on Mount Carmel with five treatment rooms and a sea-facing waiting room
Timing: One year from February 2025
Two treatment rooms here are used for respiratory patients, and the clinic's physiotherapist set the rule: those two rooms run unscented. The remaining three run a light scent, and the waiting room a heavier one. A four-room distinction inside one small clinic is the sort of thing a single-scent programme cannot do, and it is also the sort of thing a buyer remembers when the next clinic in the group asks for a supplier.
Deployment: A 19th-century silk workshop in the Croix-Rousse quarter converted into six short-let apartments
Timing: One year from June 2025
The building has 3.6 m ceilings and stone floors, which is exactly the case where a coverage figure taken from a floor plan misleads: by volume these rooms are half again as large as the area suggests. The owner bought one unit per apartment rather than one per floor, and the review scores mentioning 'dry' went to zero in the second season. What she remembered a year later was not the humidity, it was that guests stopped asking where the remote was, because the unit remembers its last setting after a power cut.
Deployment: A 22-storey residential block on the Volga side of the city, district heating from October to May
Timing: Two heating seasons from October 2024
Seven months of continuous heating is a duty cycle that kills small appliances, and the first winter's failure rate here was entirely disc scaling on the city's hard supply. The second winter used a cartridge in the tank neck and the failure rate went from 14 units to 2. Nothing about the scent programme mattered until that was fixed, which is the ordering we now insist on: water quality first, then capacity, then scent.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH03L (STD) packs 8 units to a carton, carries 24 months of warranty cover and a 15-25-day stated lead time, and draws 14.1 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC02-NURSERY | Rooms shared with a sleeping child, where light and smell both have to be quiet | An unscented night step and a light that switches fully off | The mist runs on the low step with the tray left empty, and the display and the ring both switch off, so the room is humidified without being scented or lit. |
| SC09-HALL | Open-plan lobbies with a ceiling well above a residential one | Output sized against volume, with a target rather than a step | A large-tank chassis holds a measured target and stops when the room arrives, which is the only way a tall space is controlled rather than merely filled. |
| SC06-GUESTROOM | Turned around inside a fixed housekeeping window, twelve rooms to a round | A fill and a scent refresh inside the minutes the room already gets | Top fill from a jug at the bedside and a tray filled without removing the lid, so both tasks sit inside the existing round rather than adding to it. |
| SC03-WORKDESK | A single workstation with a laptop, a phone and a shared air supply | Moisture at the desk, and no smell a neighbour can object to | A compact chassis on the low step, placed upwind of the face rather than beside the keyboard, with the scent step left off in shared space. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 90.0 mL per hour at 26.8 dB, holding 66.9 hours per fill and 26.7 hours of scent across a 71 sq m (769 sq ft) room.
Three costs dominate ownership of this product and only one of them is on the invoice. The first is the appliance. The second is the consumable - cartridges, pads, replacement discs and, on many programmes, the oil itself - which is where the repeat revenue sits for every distributor we work with and which should be planned as a line item rather than bought occasionally. The third is staff time, because a tank that cannot be cleaned quickly is a tank that does not get cleaned.
A factory programme attacks all three. Consumables ship in the same container as the appliances, which is the cheapest way to buy them. Cleaning intervals are published rather than left to guesswork, and the tank geometry is chosen so the published interval is actually achievable by one person on a round.
What we do not offer is the lowest unit price in the market. A cheaper unit in this category usually buys a narrower tank neck, a disc of unspecified origin, seals that swell on contact with citrus oil and no spares path, and every one of those shows up later as a cost somewhere else. For this configuration that means 90.0 mL per hour at 26.8 dB, holding 66.9 hours per fill and 26.7 hours of scent across a 71 sq m (769 sq ft) room.
Compliance in this category splits into three burdens that buyers often treat as one. The first is electrical and appliance safety: the CE technical file, an EMC test report and the IEC 60335-1 household appliance safety report, which is the set that gets a unit onto a shelf in Europe. The second applies only where a cell is fitted: a UN38.3 test report with an IEC 62133 cell report and an MSDS, which is the set that gets a unit onto a vessel.
The third is the oil, and it is the one that catches importers out. Where we ship oil with the unit we provide an IFRA-aligned statement of conformity, an allergen declaration listing the 26 declarable substances where they are present, an MSDS per blend and a flash point figure. That last number decides how the consignment is classified for transport: a blend below 60 C ships as a UN1266 Class 3 flammable liquid with the corresponding documentation and packaging, and a buyer who discovers this at the booking desk discovers it too late.
RoHS and REACH declarations cover the appliance materials, and because the oil contacts specific parts we also issue a material declaration for the tray, the seal and the pad rather than for the unit as a whole. Where a market needs a local approval, we issue against PSE, KC or RCM at the same time as the CE work rather than after it, because the test evidence largely overlaps. On the WL-AH03L (STD) the figures worth carrying into the next order are the 6020 mL tank, the 26.7 hours of scent per oil fill, and the 26.8 dB reading on the sleep step.
Order sizing in this category is a volume question before it is a quantity question, because the units differ in size by more than an order of magnitude across the range. A master carton of this model holds 8 units at 0.403 cubic metres, which puts roughly 416 units in a 20 ft container and 928 units in a 40 ft container on a pure volume basis.
That figure is the starting point, not the answer. Palletisation, loading losses and the mix of SKUs in the container all pull it down, and a mixed container across three SKUs will not hit the single-SKU number. We run the mix with the buyer before quoting freight, because the difference between a planned and an unplanned container is usually one extra shipment a season.
The second sizing decision is the spares and consumables ratio, which most first-time buyers set too low. One spare disc per twenty units, a cartridge per unit on hard water and a pad set per unit per year is the ratio that prevents the awkward second shipment, and the parts are cheap enough that over-ordering them costs less than the freight of a top-up. Where oil ships in the box, the oil line is quoted separately because its transport classification is not the appliance's. The WL-AH03L (STD) packs 8 units to a carton, carries 24 months of warranty cover and a 15-25-day stated lead time, and draws 14.1 W on the high step.
What is the minimum order quantity for a first aroma humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-AH03L-STD.
Can essential oil go in the water tank, or does it have its own tray?
It has its own tray, and that is the point of the design. The oil sits above the water line on pp reservoirs with fluorinated seals, rated for continuous citrus use, so the disc, the tank and the gasket never contact it. Pouring oil into the tank is the common construction and it is the reason cheap units fail in the second season: the oil films the disc and swells the seal. On WL-AH03L the tray is 8.0 mL and lifts out for washing.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. The answer is a demineralisation cartridge in the tank, which is a consumable with a real working life. This unit is specified as cartridge bay holding two cartridges, swapped on the disc life counter.
Which compliance and oil documents ship with an aroma humidifier order?
The standard appliance file set is the CE technical file, RoHS and REACH declarations, an EMC test report and the IEC 60335-1 household appliance safety report, plus a UN38.3 test report with an IEC 62133 cell report and MSDS on any build carrying a cell. Where oil ships with the unit we add an IFRA-aligned statement of conformity, an allergen declaration, an MSDS per blend and a flash point figure for transport classification. Certificates are issued against WL-AH03L, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language, the accessory kit and, on the Plus build, the oil set itself. Most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How much oil does a unit use, and how often does the tray need filling?
Published per model rather than left to guesswork. This unit holds 8.0 mL in the tray and uses 0.3 mL per hour on the step quoted, which works out at 26.7 hours of scent per fill. In a bedroom that is several nights per fill on the low step; in a reception area running all day it is a midweek top-up, and the four intensity steps, with a duty cycle option for all-day sites let the site set how much of that dose the room actually gets.
What warranty and spares support do you provide?
24 months against manufacturing defect on WL-AH03L. Misting discs, pads, cartridges, trays and seals are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard, plus a pad set per unit per year on scented programmes. On Brazil shipments the parts travel inside the same container as the appliances, which avoids a second freight booking and the paperwork that comes with it.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 15-25 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Where an oil set ships inside the retail box, the transport classification adds a step at booking.
The programme suits any buyer who has to answer for the product after it is sold, which in practice means everyone except the pure spot trader. A distributor carrying a range needs to know which chassis to put in front of which customer, and the answer is usually decided by water hardness, by who refills the tank, and by how much scent the room will accept.
Hospitality buyers need a fill interval that fits a housekeeping round. Clinical and childcare buyers need a material declaration for every oil contact part and a light that can be turned fully off. Retail and fragrance buyers need a tray they can demonstrate in front of a customer in under a minute. Facilities buyers need one unit per occupied room rather than one per floor, and they need the reasoning written down so it survives staff turnover.
What all of them have in common is that they are specifying against a room and a routine rather than against a specification sheet, which is why we ask about the site before we quote the unit. For this configuration that means 90.0 mL per hour at 26.8 dB, holding 66.9 hours per fill and 26.7 hours of scent across a 71 sq m (769 sq ft) room.
The cleanest first orders we see share one habit: the buyer declares the destination list and the oil list at quotation stage. Certificates, manuals, plugs and transport classification all follow from those two lists, and raising them once as a package costs far less than raising them market by market as each order lands.
After that the sequence is ordinary. Sample evaluation first, on the actual specification rather than a similar one, with the buyer measuring mist output by a weighed run, run time per fill at the low step, oil use over a known number of hours, and noise at one metre in a quiet room. Then the proforma invoice, which carries the stated lead time and the packing list rather than leaving them open. Then production, then booking.
The one step buyers skip and regret is the spares decision. Adding a spare disc per twenty units, a cartridge per unit where the water is hard and a pad set per unit per year costs almost nothing on a first container and prevents the top-up shipment that otherwise arrives in the middle of the season. On the WL-AH03L (STD) the figures worth carrying into the next order are the 6020 mL tank, the 26.7 hours of scent per oil fill, and the 26.8 dB reading on the sleep step.
Two things decide whether this product works, and neither is on the box: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. Get those two right and the rest of the specification rarely matters.
Everything else on this page exists to make those two decisions possible before money moves - the figures by model rather than by marketing tier, the measurement conditions stated next to the decibel, the oil rate stated per hour, and the honest statement of where the answer depends on the room.
Enquiries are welcome from anyone supplying this category at volume, whether as an importer, a distributor, a brand owner, a fragrance or gift company, a facilities or hospitality group, or a cross-border seller. Samples and the full documentation set are available on request. The WL-AH03L (STD) packs 8 units to a carton, carries 24 months of warranty cover and a 15-25-day stated lead time, and draws 14.1 W on the high step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
